Table of Contents
Advertisement
3
Press the shutter release button.
œ Your digital disk camera is equipped with an autofocus
function. The autofocus function works as explained
below.
1
Press the shutter release button halfway (focus lock).
The autofocus function activates and puts the
œ
subject in focus.
If H is selected for the shutter sound (see page
œ
119), a beep will sound when the focus locks.
When the focus locks, the focus icon (ë), shutter
œ
speed setting, and aperture setting appear in the
monitor.
2
Gently press the shutter release button all the way.
The shutter is released and the image is captured.
œ
If H is selected for the shutter sound (see page
œ
119), the set shutter sound will be heard when the
shutter is released (a camera clicking sound is set
at the time of purchase).
You can keep the shutter release button depressed
œ
and view the captured image in the monitor.
When you release the shutter release button, the
œ
clock icon | appears in the monitor signifying that
the image is being saved. During this time, images
cannot be captured. When the clock icon |
disappears, the digital disk camera is ready to
capture the next image.
To view the image you captured, set the
œ
CAMERA/PLAY switch to PLAY.
NOTE
œ If you are using the remote control to capture images, you cannot use the autofocus function.
51
English
Shutter speed
Aperture
Focus icon
1/257
4.0
Shutter release button
Focus lock
(Press halfway)
Release the shutter
(Press all the way)
Advertisement
Table of Contents
