FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Before capturing those important shots, be sure to first take a test shot to confirm that your camera is set up and ready to go Sanyo Electric shall not be held responsible for any problems resulting from the use of this camera.
SAFETY INSTRUCTIONS Read and understand all Warnings and Cautions before using this product. Warnings If foreign objects or water have entered the camera, turn the power off and remove the battery. Continued use might cause fire or electric shock. Consult the store of purchase.
Page 5
Cautions Insert the battery paying careful attention to the polarity (+ or –) of the terminals. Inserting the battery with its polarities inverted might cause fire and injury, or damage to the surrounding areas due to the battery rupturing or leaking. Do not fire the flash close to anyone’s eyes.
Page 6
Warning: TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE FOR AMERICAN USERS The following advisory is included in accordance with the laws of the State of California (USA): WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects or other reproductive harm.
Page 7
The symbol mark and recycling systems described below apply to EU countries and do not apply to countries in other areas of the world. Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and/or reused.
“Troubleshooting”. Declaration of Conformity Model number: VPC-TP1000/TP1010 Trade Name: SANYO Responsible party: SANYO FISHER COMPANY Address: 21605 Plummer Street Chatsworth, California 91311 Telephone No.: (818) 998-7322 This device complies with Part 15 of the FCC Rules. Operation is subject to the...
To prevent short-circuiting or fire, keep the battery away from other metal objects when carrying or storing. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. - SANYO Li-ion Battery, 3.7V, 700mAh EN-8...
INTRODUCTION Overview Congratulations on your purchase of the new digital camera. Capturing high-quality digital images is fast and easy with this state-of-the-art smart camera. Equipped with a 10.0-megapixel CCD, this camera is capable of capturing images with a resolution of up to 3648 x 2736 pixels. Package Contents Carefully unpack your camera and ensure that you have the following items: Common Product Components:...
GETTING TO KNOW YOUR CAMERA Front View 1. Zoom lever 2. Shutter button 4. Status LED 5. Self-timer LED 6. Lens 7. Flash 8. Microphone Power button ON/OFF EN-11...
Button Operation Item Capture Mode Playback mode Capture menu Face Detect Delete EN-12 Function Video Mode Playback mode Video menu Delete Playback Mode Still image: to capture mode Video clip: to video mode Playback menu Delete...
LCD Monitor Display Capture mode 1. Zoom status 2. Available number of shots 3. Storage media Internal memory (no card) ] microSD/SDHC memory card 4. Battery condition Full battery power Medium battery power Low battery power No battery power 5. ISO Auto ISO 64 ISO 100...
Page 15
Video mode 1. Mode icon 2. Zoom status 3. Storage media 4. Battery condition 5. Sound off icon 6. Video quality 7. Date and time 8. Available recording time/Elapsed time 9. Video resolution * Items 2 to 8 can not be selected. Playback mode - Still image playback 1.
GETTING STARTED Preparation 1. Attach the camera strap. 2. Open the battery/memory card cover. 3. Insert the supplied battery with correct orientation as shown. 4. Insert microSD/SDHC memory card (Optional). The camera has 32MB internal memory (21MB available for image storage), but you can load an microSD/SDHC memory card to expand the camera’s memory capacity.
Charging the Battery Charge the battery fully with the supplied battery charger before use. 1. Insert the battery into the battery charger. (Battery label side up) 2. Connect the power cord to the charger and insert the plug into a wall outlet. The status LED on the charger lights red when charging has started and lights green when charging is completed.
Initial Settings Setting the Date and Time The date/time needs to be set if and when: The camera is turned on for the first time. The camera is turned on after leaving the camera without the battery for an extended period of time. When the date and time information is not displayed on the LCD monitor, follow these steps to set the correct date and time.
Choosing the Language Specify in which language menus and messages are to be displayed on the LCD monitor. 1. Tap the Mode / Scene mode icon to set the camera to any scene mode; or press the The default mode is [ 2.
CAPTURE MODE Capturing Images Your camera is equipped with a 3.0'' Touch Panel LCD to help you compose images, playback recorded images/video clips or adjust menu settings. 1. Press the ON/OFF button to turn the power on. The status LED lights green and the camera is initiated. 2.
Setting the Scene Mode By simply selecting one of the available 23 scene modes, you can capture the image with the most appropriate settings. 1. Tap the Mode / Scene mode icon. 2. Drag the slide bar up and down to help to browse all of the scene modes. 3.
Scene mode Description Candlelight Select this mode when you want to capture photos of candlelight scene, without spoiling the ambience. Fireworks Select this mode when you want to capture fireworks clearly with optimal exposure. The shutter speed becomes slower, so using a tripod is recommended.
Setting the Panorama Mode This mode is designed to make it easier to take a series of shots then stitch them together with software to make a single image. You can capture a photographic subject that won’t fit into a single frame, such as a landscape, and stitch it together later with a program such as Arcsoft Panorama Maker 1.
Taking Images When the Smile Feature Is On With the camera’s new “smile detection” function, this camera detects smiles so you do not miss those special moments in life. 1. Tap the Mode / Scene mode icon to set the camera to [Smile Detection]. 2.
Recording Shots into Multiple Image Layout The Album Shot mode enables you to easily record images and combine three shots into a single image. 1. Tap the Mode / Scene mode icon to set the camera to [ 2. Press the MENU button. 3.
VIDEO MODE Recording Video Clips This mode allows you to record video clips at a resolution of 320 x 240 / 640 x 480 pixels. 1. Tap the Mode / Scene mode icon to set the camera to [ 2. Compose the image. 3.
PLAYBACK MODE Playing Back Still Images You can play back the still images on the LCD monitor. 1. Press the button. The last image appears on the screen. 2. Touch the image and slide to left or right to display next or previous image.
Thumbnail Display This function allows you to view 9 thumbnail images on the LCD monitor at the same time, which can let you quickly search for the image that you want. 1. Press the [ ] button. The last image appears on the screen. 2.
Removing Red-eye You can use this function to remove the red-eye effect after an image is taken. 1. Press the button. The last image appears on the screen. 2. Touch the image and slide to left or right to select the image that you want to edit. 3.
Attaching Voice Memos A maximum of 30 seconds of audio can be recorded as a memo for captured still images. The voice memo can be recorded only once. 1. Press the button. The last image appears on the screen. 2. Touch the image and slide to left or right to select the image to which you want to attach the voice memo.
Protecting Images Set the data to read-only to prevent images from being erased by mistake. 1. Press the button. The last image appears on the screen. 2. Touch the image and slide to left or right to select the image that you want to protect. 3.
Photo Frame Use this mode when you want to personalize your photo by adding suitable frame to your photo. 1. Press the [ ] button. 2. Press the MENU button. 3. Tap [ ] to enter [Photo Frame]. 4. Tap the left or right icon shown to choose your desired one.
MENU OPTIONS Capture Menu This menu is for the basic settings to be used when capturing still images. I S O AUTO 1. Press the ON/OFF button to turn the power on. 2. Tap the Mode / Scene mode icon to set the camera to any scene mode (except for video).
Page 34
W. Balance This sets the white balance for a variety of lighting conditions and permits images to be captured that approach the conditions that are seen by the human eye. * [@]Auto * [$]Incand. * [&]Fluoresc.1 * [*]Fluoresc.2 * [%]Daylight * [#]Cloudy * [(]Manual WB Sharpness...
Page 35
Capture Md. This sets the recording method at the time of capturing images. ] Single: Captures one image at a time. * [ T ] Continuous: Permits continuous capture of up to 3 images. * [ U ] AEB: Permits 3 consecutive images in the order of standard exposure, underexposure and overexposure compensation.
Video Menu This menu is for the basic settings to be used when recording video clips. 1. Tap the Mode / Scene mode icon to set the camera to [ 2. Press the MENU button. 3. Tap the submenu of the desired option item, and tap the desired setting. 4.
Playback Menu In the [ ] mode, choose which settings are to be used for playback. 1. Press the button. 2. Press the MENU button. 3. Tap the submenu of the desired option item, and tap the desired setting. 4. To exit from the menu, press the MENU button. Fix Red Eyes Refer to the section in this manual titled “Removing Red-eye”...
Page 38
Qual. Change Changes the quality (compression) of a recorded image. Compress images down to half of their size or less, overwrite old size images with newly compressed images. It is only possible to reduce the image quality/size, never to increase it. Copy to Card Allows you to copy your files from the camera’s internal memory to a microSD/SDHC memory card.
Setup Menu Set your camera’s operating environment. 1. Tap the Mode / Scene mode icon to set the camera to any scene mode; or press the button. 2. Press the MENU button. 3. Drag the slide bar down to the end of the menu. Tap [ 4.
Page 40
Light Freq. This camera supports different lighting frequencies: 50 Hz and 60 Hz. When photographing under fluorescent lighting, select the correct frequency setting depending in your local area's voltage. * 50 Hz / 60 Hz LCD Bright. Select a brightness level for the LCD monitor. * Standard / Bright Format Refer to section in this manual titled “Formatting the Memory Card or Internal Memory”...
TRANSFERRING FILES TO YOUR COMPUTER System Requirement Windows Pentium III 800 or equivalent Windows 2000/XP/Vista 256MB RAM (512MB recommended) 150MB available hard disk space CD-ROM drive Available USB port Downloading Your Files 1. Connect one end of the USB cable to an available USB port on your computer.
EDITING SOFTWARE INSTALLATION There are 2 types of software that are included on the CD-ROM: MediaOne Gallery SE - makes it the easiest way to manage and share your digital life with family & friends. The intuitive thumbnail library automatically organizes, updates and sorts files for the most natural way to browse your multimedia collection.
APPENDIX Possible Number of Shots Possible number of shots (still image) The table shows the approximate shots that you can capture at each setting based on the capacity of the internal memory and the microSD/SDHC memory card. Size Quality Fine Standard 3648 x 2736 Economy...
Troubleshooting Refer to the symptoms and solutions listed below before sending the camera for repairs. If the problem persists, contact your local reseller or service cente Symptom The power does not come The battery runs out quickly. The battery is not fully charged. The battery or camera feels warm.
Connecting to a PictBridge Compliant Printer If a printer that supports PictBridge is available, images can be printed by connecting the digital still camera directly to the PictBridge-compatible printer without using a computer. Connecting the camera to the printer 1. Connect one end of the USB cable to your camera.
Page 47
3. If you select [Single] in the previous step, the figure shown on the right hand side will appear. to select the image that you want to print . Tap +/- to select the number that you want to print (up to 99) . 4.