Installing The Battery Pack - Sanyo IDC-1000ZE iDshot Instruction Manual

Installing the battery pack

1
Open the battery pack cover.
1
Press and hold down the BATT knob on the digital
disk camera bottom.
2
Pull the battery pack cover toward the front of the
digital disk camera and then lift it up.
2
Attach the charged battery pack to the battery pack
mating area.
1
Orient the battery pack as shown in the figure below,
align the edges of the battery pack and the battery
pack mating area, and insert the battery pack in the
battery pack mating area.
2
Push in the direction of the arrow.
3
Close the battery pack cover.
1
Close the battery pack cover.
2
Push it towards the back of the digital disk camera
until it is secured in place.
27
English
d mark
1
Battery pack cover
1
2
2
1
2