Related Manuals for Sanyo VPC-T850
Summary of Contents for Sanyo VPC-T850
- Page 1 VPC-T850 iNSTRUCTiON MANUAL Digital Camera Please read these instructions carefully before using the camera. Keep this manual in a safe place for later reference.
- Page 2 FCC STATEMENT This device complies with Part 15 of the Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested...
- Page 3 READ THIS FIRST Trademark Information • Microsoft ® and Windows ® are U.S. registered trademarks of Microsoft Corporation. • Pentium ® is a registered trademark of Intel Corporation. • Macintosh is a trademark of Apple Inc. • is a trademark. •...
- Page 4 SAFETY INSTRUCTIONS Read and understand all Warnings and Cautions before using this product. Warnings If foreign objects or water have entered the camera, turn the power and remove the battery. Continued might cause fire or electric shock. Consult the store purchase.
- Page 5 Cautions Insert the battery paying careful attention to the polarity (+ or -) of the terminals. inserting the battery with its polarities inverted might cause fire and injury, or damage to the surrounding areas due to the battery rupturing or leaking. Do not fire the flash close to anyone's eyes.
- Page 6 Warning: TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE FOR AMERICAN USERS The following advisory is included in accordance with the laws of the State of California (USA): WARNING: This product contains chemicals,...
- Page 7 ICES-003 FOR EU USERS Note: • This symbol mark and recycle system apply to EU countries do not apply to countries in other areas of the world. Your SANYO product is designed manufactured with high quality materials components which recycled reused.
- Page 8 With FCC Standards r_'_f_" ested To Comply "_ FOR HOME OR OFFICE Declaration of Conformity Model number: VPC-T850 Trade Name: SANYO Responsible party: SANYO FISHER COMPANY Address: 21605 Plummer Street Chatsworth, California 91311 Telephone No.: (818) 998-7322 This device complies with Part 15 of the FCC Rules.
- Page 9 Notes on Battsrg Usags When you use the battery, carefully read and strictly observe the Safety Instructions and the notes described below: • Use only the specified battery (3.7V). • Avoid extremely cold environments as low temperatures can shorten the battery life and reduce camera performance.
-
Page 10: Table Of Contents
CONTENTS 28 MENU OPTIONS INTRODUCTION Overview 28 Capture Menu 31 Video Menu Package Contents 32 Playback Menu GETTING TO KNOW YOUR 33 Setup Menu CAMERA 34 TRANSFERRING FILES TO Front View YOUR COMPUTER Rear View 34 Downloading Your Files LCD Monitor Display 35 USING THE CAMERA AS A PC GETTING... -
Page 11: Introduction
INTRODUCTION OvePview Congratulations on your purchase of the new digital camera. Capturing high-quality digital images is fast and easy with this state-of-the-art smart camera. Equipped with a 8.1-megapixel CCD, this camera is capable of capturing images with a resolution of up to 3264 x 2448 pixels. Package Contents Carefully... -
Page 12: Getting To Know Your Camera
GE3-FING TO KNOW YOUR CAMERA Front View 1. Shutter button Flash (_:_ Power button Status LED Microphone Lens Self-timer 8. Zoom lever EN-11... -
Page 13: Rear View
Rear View 1. LCD monitor Strap holder MODE M ode button USB or AV OUT terminal MENU Menu button SET Set button DIsP. Display button Direction button • button 8. I_1 Playback button Focus button Battery / Memory card cover •... -
Page 14: Lcd Monitor Display
LCD Monitor Display Capture mode 1. Zoom status 2. Voice memo 3. Battery condition [ _ ] Full battery power [<:_ ] Medium battery power [ _ ] Low battery power No battery power 4. Flash mode [Blank]Auto Flash [ _.®] Red-eye Reduction [ _ ] Pre-flash [ _ ]... - Page 15 Video mode [ _m ] 1. Zoom status 2. Flash mode 3. Battery condition Storage media 5. Main focus area 6. Video quality 7. Video resolution 8. Available recording time/Elapsed time 9. Self-timer icon 10. Date and time 11. Focus setting 12.
-
Page 16: Preparation
GE'I-I'ING START Preparation 1. Attach the camera strap. Open the battery/memory card cover. Insert the supplied battery with correct orientation shown. Insert an SD/SDHC memory card (Optional). • The camera has 32MB internal memory (28MB available for image storage), but you can load an SD/SDHC memory card to... -
Page 17: Charging The Battery
Charging the Batterg Charge the battery fully with the supplied battery charger before use. 1, insert the battery into the battery charger, 2. Connect the power cord to the charger insert the plug into a wall outlet. • The status LED on the charger lights red when... -
Page 18: Initial Settings
Initial Settings Setting the Date and Time The date/time needs to be set if and when: • The camera is turned on for the first time. • camera is turned after leaving camera without the battery extended period of time. When the date and time information is not displayed... - Page 19 Choosing the Language Specify in which language menus and messages are to be displayed on the LCD monitor. 1. Press the _ button to [a] or [_m]; or press the [[_] button. 2. Press the MENU button. 3. Select [Setup] menu with the _ button.
-
Page 20: Capture Mode
CAPTURE MODE Capturing Images Your camera is equipped with a 2.8" full color TFT LCD monitor to help you compose images, playback recorded images/video clips or adjust menu settings. Press the O button to turn the power • The status LED lights green and the camera is initiated. - Page 21 Recording Shots using Face Detection Technologg Face Detection Technology can identify and focus on the human faces in the image. This advanced function simultaneously detects up to 5 human faces regardless of their position in the scene. White frame Green frame Face detection function is on...
- Page 22 R_cording Voic_ M_mos A voice memo can be recorded once for 30 seconds in the still image mode immediately following a still image capture. 1. Press the ,o_Eo,m button to [ t'_ ]. Press the MENU button, and select the [Function] menu with the I_ button.
-
Page 23: Video Mode
VIDEO MODE Recording Video Clips This mode allows you to record video clips at a resolution of 320 x 240 / 640 x 480 pixels. 1. Press the _o_ button to [bin]. 2. Compose the image. 3. Press the shutter button. MODE •... -
Page 24: Playback Mode
PLAYBACK MODE Plaging Back Still Images You can play back the still images on the LCD monitor. Press the [r_] button. • The last image appears on the screen. images displayed forward reverse sequence with the ",1/ • buttons. • To view previous image,... -
Page 25: Thumbnail Display
Thumbnail Displag This function allows you to view 9 thumbnail images on the LCD monitor at the same time, which can let you quickly search for the image that you want. 1. Press the [FCq] button. • The last image appears on the screen. - Page 26 Attaching Voic_ M_mos A maximum of 30 seconds of audio be recorded as a memo for captured still images. The voice memo can be recorded only once. 1. Press the [[_E]] button. • The last image appears on the screen. Select the image to which...
-
Page 27: Protecting Images
Protecting Images Set the data to read-only to prevent images from being erased by mistake. 1. Press the [[]] button. Select the image that you want to protect with the 4 / • buttons. 3. Press the MENU button. Select [Protect] with the • / • buttons and nress th_ SET DISP. -
Page 28: Erasing Images
Erasing Images Erasing single image / Erasing all images 1. Press the [1_] button. Select the image you want to erase with the • / • buttons. Press the Q_ button. Select [Single] or [All] with the • / • buttons, and press the SET button. -
Page 29: Menu Options
MENU OPTIONS Captur_ M_nu This menu is for the basic settings to be used when capturing still images. 1. Press the _,_ button to [ O ]. 2. Press the MENU button, and select the [Capture] / [Function] menu with the •... - Page 30 Sharpness This sets the sharpness of the image that will be captured. * Hard / Normal / Soft Saturation This sets the saturation of the image that will be captured. * High / Normal / Low White Balance This sets the white balance for a variety of lighting conditions and permits...
- Page 31 Capture Mode This sets the recording method at the time of capturing images. * [ Blank ] Single: Captures one image at a time. * [ _ Continuous: Permits continuous capture of up to 3 images. * [ _ AEB: Permits 3 consecutive images in the order of standard exposure, underexposure and overexposure...
-
Page 32: Video Menu
Video Menu This menu is for the basic settings to be used when recording video clips. 1. Press the _ button to [_]. Press the MENU button, and select the [Capture] / [Function] menu with the < / • buttons. Select the desired option... - Page 33 Plagback Menu In the [[E]] mode, choose which settings are to be used for playback. 1. Press the [1_1] button. 2. Press the MENU button. 3. Select the desired option item with the • / • buttons, and press the SETbutton to enter its D_sP.
-
Page 34: Setup Menu
Setup Menu Set your camera's operating environment. 1. Toggle the '_,_ button to [a] or [_81_];or press the [[]] button. Press the MENU button, and select the [Setup] menu with the _. button. Select the desired option item with the • / • buttons, and press the s_. -
Page 35: Transferring Files To
TRANSFERRING FILES TO YOUR COMPUTER System Requirement • PowerPC G3/G4/G5 • Pentium Ill 600 MHz or higher • Windows 2000/XP/Vista • OS 9.0 or later • 128MB RAM • 128MB RAM • 128MB hard disk space • 128MB hard disk space •... -
Page 36: Using The Camera As A Pc
USING THE CAMERA AS A PC CAMERA Your camera can act as a PC camera, which allows you to videoconference with busi- ness associates, or have a real-time conversation with friends or family. To use the cam- era for videoconferencing, your computer system must include... -
Page 37: Editing Software Installation
EDITING SOFTWARE INSTALLATION There are 2 types of software that are included on the CD-ROM: MediaOne Gallery SE - makes it the easiest way to manage and share your digital life with family & friends. The intuitive thumbnail library automatically organizes, updates and sorts files for the most natural way to browse... -
Page 38: Specifications
SPECIFICATIONS Image sensor 1/2.5" CCD sensor (8.1 megapixels) <Still image> 3264 x 2448, 2816 x 2112, 2272 x 1704, 1600 x 1200, 640 x 480 Image resolution <Video clip> 640 x 480 (30 fps), 320 x 240 (30 fps) LCD monitor 2.8"... -
Page 39: Appendix
APPENDIX Possible Number of Shots Possible number of shots (still image) Time table shows time approximate shots that you can capture at each setting based on the capacity of the internal memory and the SD/SDHC memory card. Fine 3264 x 2448 _] Standard 1015 2033... - Page 40 Troubl_shooUng Refer to the symptoms and solutions listed below before sending the camera for repairs. If the problem persists, contact your local reseller or service center. The power does not come The battery is not inserted. Insert the battery correctly. The battery is exhausted.
-
Page 41: Connecting To A Pictbridge Compliant Printer
Connecting to a PictBridge Compliant Printer If a printer that supports PictBridge is available, images can be printed by connecting digital still camera directly to the PictBddge-compatible printer without using a computer. Connecting the camera to the printer 1. Connect end of the cable to your... - Page 42 If you select [Single] in the previous step, figure shown on the right hand side will appear. • Select the image that you want to print with the • / • buttons. • Select the [Print Num] (up to 99) with the • / •...
- Page 43 SANYO Electric Co., Ltd. Printed in China...