3.9.9 DC Link Cable Connection
1. Connect the ground cables.
Ground connections are provided on the bottom and on the top of the rack. Either may be used for grounding.
NOTICE
Connect the rack ground wire with an M12 x 30 mm
factory-provided and must be provided by the installer or customer.
The fastening torque should be 30Nm (265 in
ET003222373
English 4/2018. Rev 0.0
Figure 3-109: Grounding Points (2 EA)
.
Assembling the Product
3
45 mm (1.75 in)
Pitch between Holes
screw.
Rack ground screws are not
lbs).
85