Transferring Calls - Samsung DCS KEYSET User Manual

Samsung DCS

Transferring Calls

You can transfer a call from your extension to another number in one
of two ways. You can do a 'screened' transfer and inform the called
party who is calling, or you can do a 'blind' (unscreened) transfer
without notification.
1. While on a call, press the
ber, group number or external number.
OR
Press a
DSS
Your call is automatically put on transfer hold.
2. Hang up when you hear ringing (this is a blind transfer).
OR
Wait for the called party to answer, announce the call and hang
up (this is a screened transfer). If the transfer is refused, you will
be reconnected to the outside line when the called party hangs up.
Alternatively, you can press the
party. If you wish to send the call to another extension without
waiting for the first extension to hang up, simply press another
key.
DSS
OR
Press the
begin the transfer process again.
When you are the transferring a call to a keyset set for Voice An-
nounce or Auto Answer, the transferred call will always ring.
Note:
•
After the called party answers, you may toggle between the calling and called
parties by pressing the
•
If you receive No More Calls tone, the extension has no key available to re-
ceive another call. Press the
•
You cannot transfer an internal call by pressing a
key and dial the destination extension number.
TRSF
key or station group key.
key or
CALL
key.
TRSF
TRSF
key and dial an extension num-
TRSF
TRSF
key to return to the calling party and
DT
key to return to the caller.
– 20 –
Keyset User Guide
key to return to the calling
key. You must press the
DSS