Answering An Outside Call; Universal Answer Device; Recall Dial Tone; Sending A Flash - Samsung DCS KEYSET User Manual

Samsung DCS
Note: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER

Answering An Outside Call

• • • • Lift the handset and you are automatically connected to the ring-
ing call. (See Ring Preference under Customising Your Keyset.)
OR
Press the
phone.
Note: If a call is flashing at your keyset but not ringing, you must press the flashing
key to answer.

Universal Answer Device

Outside lines can ring over the paging system or to a loud ringer. To
answer calls ringing in night service to this device, dial 67 or press
the key.
UA
Note: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER

Recall Dial Tone

• • • • Press the
NEW
tone and then make a new call on the same line.
Note: If the
NEW
grammed to recall dial tone.

Sending a Flash

While on an outside call, press the programmed
flash to the telephone company. This is required for some custom
calling features or
key before dialling.
key to automatically answer on the speaker-
ANS/RLS
key before dialling.
key to disconnect your existing call, wait for dial
key does not appear on your keyset, the
CENTREX
use (e.g. for nuisance calls).
– 12 –
Keyset User Guide
key may be pro-
RECALL
key to send a
FLASH