Call Indications - Samsung DCS KEYSET User Manual

Samsung DCS Keyset User Guide
Lines from the telephone company are " . lines." Calls on these
C.O
lines are referred to as "outside calls." Your system can have individ-
ual C.O. line keys—called Direct Trunk Selection ( keys—or
DTS)
lines may be assigned to groups. When they are in a group, you ac-
cess a line by dialling an access code or pressing a route key. For ex-
ample, you might dial '9' or '0' or press the key to get a local
LOCAL
outside line. If Least Cost Routing is used, pressing the key will
LCR
automatically select a pre-programmed . line according to what
C.O
digits are dialled. Each line in the system is numbered beginning with
701, then 702, 703, etc.
Note: 408/408i systems have 2-digit line numbers 71–74.
Direct Station Selection ( ) keys are programmed to ring specific
DSS
extensions. You can press a key instead of dialling the extension
DSS
number. A key will light red when that extension is busy (this is
DSS
called a Busy Lamp Indication).
DCS provides distinctive ring patterns to your keyset. Ring patterns
vary depending on the country in which you reside. For example, in
the UK:
• • • • Outside calls have a single ring tone repeated.
• • • • Internal calls have a double ring tone repeated.
• • • • Doorphone calls and alarm/appointment reminders have a short
ring tone repeated very quickly.

Call Indications

The keys on your phone have light emitting diodes ( s). Some of
LED
these are tri-coloured s that light green, red or amber (green and
LED
red together). Some of the keys can only light red. See the relevant
keyset layout diagram (below) for a description of the keyset you are
using.
– 2 –