Removing The Decurler Roller - Canon K1 Service Manual

3
Parts Replacement and Cleaning Procedure > Removing the Buffer Pass > Removing the Decurler Roller

Removing the Decurler Roller

Preparation
1) Remove the Buffer Pass Unit from the host machine.
2) Remove the Upper Cover.
Procedure
1) Disconnect the 8 connectors, and free the harness from the Wire Saddle.
2) Remove the Decurler Motor 1 Unit.
• 5 Screws (Binding)
[1]
3 Parts Replacement and Cleaning Procedure > Removing the Buffer Pass > Removing the Decurler Roller
[1] [2]
x8
F-3-27
[3] [2]
x5
[3]
[3]
F-3-28
3) Remove the E-ring [1], gear [2], Parallel Pin [3], and bush [4].
4) Remove the 2 springs [1].
5) Remove the plate [2].
• 1 Screw (Binding) [3]
[1]
[4] [3] [2] [1]
F-3-29
[1] [2]
[3]
F-3-30
3-10
3-10