4
Installation > Installation Procedure
Installation Procedure
1) Install the Lattice Unit to the Buffer Pass Unit.
• 2 Bosses
• 1 Screw (P Tightening; M4x10)
• 1 Screw (TP; M3x8)
2) Connect the 2 connectors.
x2
4
Installation > Installation Procedure
3) Remove the Reader Left Cover. (The removed cover will not be used).
• 2
• 2 Claws
Boss
x2
Boss
F-4-5
4) Open the cover.
• Front Cover
• Right Lower Cover
• Right Upper Cover
F-4-6
Screws (The removed screws will be used in step 25)
x2
x2
Claw
4-4
F-4-7
F-4-8
4-4