Closing The Cover Plate Of An Ru Cabling Cavity - Huawei DBS3900 Installation Manual

RRU3260
Installation Guide
Figure 9-25 Installing a CPRI fiber optic cable

Step 3 Connect the end labeled 2A and 2B of the fiber optic cable to the optical module on the BBU
side.
Step 4 Route the cables according to the instructions in
cable ties to bind the cables.
Step 5 Label the installed cables according to the instructions in Attaching an L-Shaped Label.
----End

9.12 Closing the Cover Plate of an RU Cabling Cavity

This section describes the procedure for closing the cover plate of an RU cabling cavity.
Issue 05 (2014-06-30)
To avoid any damage to fiber optic cables, the cables connected to the RU must be
installed according to the installation process. For details about the installation process, see
9.3 Installation Process.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Installing RU Cables
9.1 Cabling Requirements, and then use
105