Table of Contents
Advertisement
Lighting
+/-90°
Origin Pt. move
Pre (Next) Seq. move --- The point moves to the previous (next) Seq. of the present mount data.
Continuous moving --- The mount point moves from the present data to the last Seq. in succes-
Mount data Save --- Data corrected by inching is used for mount data.
All-round shot
293C-E-EMA02-A01-02
--- The lamp of camera is changed.
Adjust the brightness to be easy to correct the dispensing position.
Lamp 1 : 100
Lamp 1 : 100
Lamp 2 : 0
Lamp 2 : 100
--- The theta angle of mount point is changed.
The outline of nozzle on the monitor is also changed depending upon the
angle.
+90°
+180°
∗ Carry out the correction per 1°, at "Mount data" in "Data
modification."
--- The dispensing point moves to the original position of present mount data.
The movement after the correction by inching is canceled. Also, as for multi
point data, the point moves to the No. 1 of it.
sion.
STOP
Press
to stop on the way.
Also, as for the multi point data, not the multi point but the mount data is
corrected.
--- The following data organizing each mount data can be checked.
• Dispensing code data and multi point data
Functions during Production Stop
Lamp 1 : 0
Lamp 1: 0
Lamp 2 : 100
Lamp 2 : 200
-90°
0°
2
Page 2-9
Advertisement
Table of Contents
