Table of Contents
Advertisement
7-7
Recognition Device Maintenance
All recognition movements can be checked. (
Ref no
The present setting value of reference No. can be checked and changed. It can be changed by
Threshold
The present setting value of binary threshold can be checked and changed. It can be changed by
Teach scrn
When the reference No. set now is the block, the teaching screen appears.
Area
The area can be set as a test. The area position can be changed by
by pressing Complete .
Recog
The block match recognition is carried out under the condition set now.
Error scrn
The screen of recognition error occurred by now can be checked at the maximum of 110 screens.
The screen can be changed by
Scale
The scale appears in the recognition screen.
Cross line
The cross line appears on the recognition screen. The position can be changed by
Ver, Memory
The versions of present recognition system and recognition ROM appear on the recognition
screen.
Recog unit
update
The recognition system can be updated.
Reset
In selecting "Area," "Error scrn," and "cross line," each information can be reset.
Cursor resps
In selecting "Ref no." "Threshold," "Area," and "Cross line," each change can be adjusted.
Page 7-8
.
.
.
APPENDIX A)
.
. This is set
293C-E-EMA07-A01-01
Advertisement
Table of Contents
