Installing The Processor Fan; Card Fan - Dell Dimension 9200 Service Manual

Documentation
1 fan release lever
4

card fan

10. Lift the fan release lever, then slide the fan toward the back of the computer to release the four fan tabs from the four
keyhole slots in the bottom cover.
11. Remove the fan from the computer.

Installing the Processor Fan

When reinstalling the fan, ensure that you do not pinch the wires that run between the system board and the fan.
NOTICE: Ensure that the four fan tabs are fully inserted into the four keyhole slots in the bottom cover so that the fan
can slide back fully into position. Ensure that the fan release lever tab is seated into its slot in the bottom cover.
Follow the removal procedure (Removing the Processor
Card Fan
http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/parts.htm (63 of 68) [12/9/2007 11:22:24 PM]
2 fan release lever tab
Fan) in reverse order.
3 processor fan