I/O-Panel Components - Dell Dimension 9200 Service Manual

Documentation
1 heat sink and fan shroud assembly
10. Replace the computer cover (see
NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug the cable into
the computer.
11. Connect your computer and devices to electrical outlets, and turn them on.
I/O Panel
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet
before opening the cover.

I/O-Panel Components

http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/parts.htm (55 of 68) [12/9/2007 11:22:24 PM]
2 heat-sink assembly bracket
Replacing the Computer Cover).
3 captive screw housing (2)