Samsung VP-M102 Owner's Instruction Manual page 49

You can set the sound of the CAM as you want.
1. Move [Mode Selector] down to turn on the CAM and move it down again.
The Mode Selection screen appears.
2. Move the [ / ] switch to select System Settings
3. Move the [ / ] switch to select <System> and press the [OK] button.
4. Move the [ / ] switch to select <Beep Sound> and press the [OK] button.
5. Move the [ / ] switch to select desired sound and press the [OK] button.
On: Turn the effect sound on.
Off: Turn the effect sound off.
6. Press the [Back] button to finish setting.
Note
If you select <Back> in the menu, the previous menu appears.
When the earphones or Video/Audio cable is connected to the CAM,
the beep sound function does not operate.
2
and press the [OK] button.
3
4
5
You can see the information of the version.
1. Move [Mode Selector] down to turn on the CAM and move it down again.
The Mode Selection screen appears.
2. Move the [ / ] switch to select System Settings
3. Move the [ / ] switch to select <System> and press the [OK] button.
4. Move the [ / ] switch to select <Version Info> and press the [OK] button.
The version of the CAM is displayed.
5. Press the [Back] button to finish viewing version information.
Note
If you select <Back> in the menu, the previous menu appears.
2
and press the [OK] button.
3
4