Samsung VP-M102 Owner's Instruction Manual page 47

To save energy or battery, you can set the Auto Shut off function.
1. Move [Mode Selector] down to turn on the CAM and move it down again.
The Mode Selection screen appears.
2. Move the [ / ] switch to select System Settings
3. Move the [ / ] switch to select <System> and press the [OK] button.
4. Move the [ / ] switch to select <Auto Shut off> and press the [OK] button.
5. Move the [ / ] switch to select desired setting and press the [OK] button.
Off: Cancel the Auto Shut off function.
5 Minutes: the CAM turns off after 5 minutes.
6. Press the [Back] button to finish setting.
Notes
If the CAM turns off after 5 minutes, you can use the CAM again after turning it on.
If you select <Back> in the menu, the previous menu appears.
The <Auto Shut off> function cannot be operated if you connect the power adapter to the CAM.
It can be only operated when you insert battery pack into the CAM.
2
and press the [OK] button.
3
4
5
Demo function will allow you to view all the functions that the CAM supports. Demo will run for up to 5 minutes.
1. Move [Mode Selector] down to turn on the CAM and move it down again.
The Mode Selection screen appears.
2. Move the [ / ] switch to select System Settings
3. Move the [ / ] switch to select <System> and press the [OK] button.
4. Move the [ / ] switch to select <Demo> and press the [OK] button.
5. Move the [ / ] switch to select desired setting and press the [OK] button.
Off: Cancel the Demo function.
5 Minutes: Start the Demo function in 5 minutes.
Play Now: Start the Demo function now.
6. Press the [Back] button to finish setting.
Note
If you select <Back> in the menu, the previous menu appears.
If you set the Demo function, it operates only in Video Record.
2
and press the [OK] button.
3
4
5