2.2 Cabinet Configuration
OfficeServ 7100 is configured of the main device with a basic cabinet and OfficeServ
solution. The Main device cabinet is a one stage shelf composed of three slots and consists
of a control part on the main slot and two subscriber parts on the universal slot.
Front of Basic Cabinet
Rear of Basic Cabinet
Configuration
Power Switch
Power I/O connector
AC LED
DC LED
Battery Socket
Ground Lug
© SAMSUNG Electronics Co., Ltd.
Slot 0
Figure 2.1 Configuration of OfficeServ 7100 Cabinet
Table 2.1 Configuration in the Back side of OfficeServ 7100
Power on/off OfficeServ 7100 system.
Connector to connect the power cable
The LED turns on while applying AC power.
The LED turns on while the DC power normally comes out.
Socket to connect an external battery
Lug to ground the system communication
OfficeServ 7100 System Description
Slot 1
Slot 2
Function
2-3