Panasonic KX-HNB600 User Manual page 65

3
Select the desired setting.
– [High]: The selected sensor is very sensitive to changes, i.e., even a small change will trigger the
sensor.
– [Normal]: The selected sensor is moderately sensitive to changes.
– [Low]: The selected sensor is somewhat sensitive to changes.
– [Very Low]: The selected sensor is only slightly sensitive to changes, i.e., a large change is
required to trigger the sensor.
– [OFF]: The selected sensor is disabled.
4
Tap [OK].
Image sensor sensitivity (indoor cameras only)
You can adjust the sensitivity of the camera's motion detection features.
1
From the [Home Network] app home screen, tap [Settings].
2
Tap [Device Profiles].
3
Tap [Camera].
4
Select the device that you want to change settings for.
5
Tap [Motion Sensitivity].
6
Select the desired setting.
– [High]: The image sensor is very sensitive to changes, i.e., even a small change will trigger the
sensor.
– [Normal]: The image sensor is moderately sensitive to changes.
– [Low]: The image sensor is somewhat sensitive to changes.
– [Very Low]: The image sensor is only slightly sensitive to changes, i.e., a large change is required
to trigger the sensor.
– [OFF]: The image sensor is disabled.
7
Tap [OK].
Note:
R You can also change these settings while viewing live camera images by opening the options menu
and selecting [Indoor Camera Settings].
Detection area
You can select which areas of the camera image are monitored for motion detection. This allows you to
ignore motion in certain areas of the camera's image.
1
From the [Home Network] app home screen, tap [Camera].
2
Tap the camera image of the desired camera.
3
Open the options menu (see "Displaying the options menu", Page 35).
4
Tap [Outdoor Camera Settings] or [Indoor Camera Settings].
5
Tap [Set Detection Area].
6
Tap the desired areas of the camera image.
R Gray areas of the camera image indicate areas for which image detection is disabled.
R Tap [Select All] to disable image detection for all areas of the camera image.
R Tap [Reset] to enable image detection for all areas of the camera image.
7
Tap [OK].
Image brightness
You can adjust the overall brightness of the camera image.
1
From the [Home Network] app home screen, tap [Camera].
Using the app
65