Huawei SUN2000L-5KTL Quick Manual
Hide thumbs
Also See for SUN2000L-5KTL:
- Quick manual (21 pages) ,
- User manual (151 pages) ,
- Quick manual (4 pages)
Advertisement
Quick Links
SUN2000L-(2KTL-5KTL)
Quick Guide
Issue: 03
Part Number: 31508725
Date: 2018-05-30
1
Overview
2
Installing the Device
Installation Requirements
2.1
Tilt and Space
NOTE
If multiple inverters need to be installed, see SUN2000L-(2KTL-5KTL) User Manual for the installation dimensions.
Installing the Mounting Bracket
2.2
Support-mounted Installation
(1) Front panel
(3) Mounting bracket
(5) LED
(7) DC input terminals (PV1+/PV1–) (8) DC input terminals (PV2+/PV2–)
(9) Battery terminals (BAT+/BAT–)
(11) AC output port (AC)
(13) Antenna port (ANT)
(15) Ground point
Prepare M8 stainless bolt assemblies (including flat washers, spring washers, and M8 bolts) with
appropriate lengths as well as matched flat washers and nuts based on the support specifications.
You are advised to
apply anti-rust paint
on the hole
positions for
protection.
1
Copyright © Huawei Technologies Co., Ltd. 2018. All rights reserved.
NOTICE
1. The information in this document is subject to change without
notice. Every effort has been made in the preparation of this
document to ensure accuracy of the contents, but all statements,
information, and recommendations in this document do not
constitute a warranty of any kind, express or implied.
2. Before installing the device, closely read the user manual to get
familiar with product information and safety precautions.
3. Only certified electricians are allowed to operate the device.
Operation personnel must wear proper personal protective
equipment (PPE) all the time.
4. Before installing the device, check that the package contents are
intact and complete against the packing list. If any damage is
found or any component is missing, contact your dealer.
5. Huawei shall not be liable for any consequence caused by
violation of the storage, transportation, installation, and operation
regulations specified in this document and the user manual.
Dimensions
(2) Mounting plate
(4) Heat sink
(6) DC switch (DC SWITCH)
(10) COM port (COM)
(12) Ventilation valve
(14) Alarm port (ALARM)
Advertisement
Related Manuals for Huawei SUN2000L-5KTL
Summary of Contents for Huawei SUN2000L-5KTL
- Page 1 If any damage is found or any component is missing, contact your dealer. 5. Huawei shall not be liable for any consequence caused by violation of the storage, transportation, installation, and operation regulations specified in this document and the user manual.
- Page 2 Wall-mounted Installation DANGER Avoid drilling holes in the utility pipes and/or cables attached to the back of the wall. Installing the SUN2000L Installing the WiFi Antenna NOTICE If the bottom of the mounting plate does not snap into place, push the SUN2000L from the front until the bottom of the mounting plate snaps into the mounting bracket.
- Page 3 2. Connect the AC connector to the AC output port. 3. Check the route of the AC output power cable. To remove the AC connector from the SUN2000L, perform the operations in reverse order. The right figure shows how to remove a plug insert. Installing the DC Input Power Cable 1.
- Page 4 LED3 indication Huawei Technologies Co., Ltd. Blinking green at short intervals The SUN2000L is in communication. Huawei Industrial Base, Bantian, Longgang Blinking green at long intervals The SUN2000L has connected to the Shenzhen 518129 People's Republic of China mobile phone.