Configuring Isp Domain Attributes - HP A5830 Series Configuration Manual

On the switch, each user belongs to an ISP domain. If a user provides no ISP domain name at login, the
switch considers the user as belonging to the default ISP domain.
To create an ISP domain:
To do...
1. Enter system view.
2. Create an ISP domain and
enter ISP domain view.
3. Return to system view.
4. Specify the default ISP
domain.
To delete the ISP domain that is functioning as the default ISP domain, you must change it to a non-
default ISP domain by using the undo domain default enable command.

Configuring ISP domain attributes

In an ISP domain, you can configure the following attributes for all users in the domain:
Domain status—By placing the ISP domain to the active or blocked state, you allow or deny
•
network service requests from users in the domain.
Maximum number of online users—The switch controls the number of online users in a domain to
•
ensure system performance and service reliability.
Idle cut—This function enables the switch to check the traffic of each online user in the domain at
•
the idle timeout interval and to log out any user in the domain whose traffic during the idle timeout
period is less than the specified minimum traffic.
Self-service server location—By using the information defined in this attribute, users can access the
•
self-service server to manage their own accounts and passwords.
Default authorization user profile—If a user passes authentication but is authorized with no user
•
profile, the switch authorizes the default user profile of the ISP domain to the user and restricts the
user's behavior based on the profile.
To configure ISP domain attributes:
To do...
1. Enter system view.
2. Enter ISP domain view.
3. Place the ISP domain to the
state of active or blocked.
4. Specify the maximum number
of online users in the ISP
domain.
Use the command...
system-view
domain isp-name
quit
domain default enable isp-
name
Use the command...
system-view
domain isp-name
state { active | block }
access-limit enable max-user-
number
37
Remarks
—
Required.
—
Optional.
By default, the default ISP domain is the
system predefined ISP domain system.
Remarks
—
—
Optional.
By default, an ISP domain is in the
active state, and users in the domain
can request network services.
Optional.
No limit by default.