Setting User Group Password Control Parameters - HP A5830 Series Configuration Manual

To do...
5. Configure the password
composition policy.
6. Configure the password
complexity checking policy.
7. Set the maximum number of
history password records for
each user.
8. Specify the maximum number
of login attempts and the
action to be taken when a
user fails to log in after the
specified number of attempts.
9. Set the number of days during
which the user is warned of
the pending password
expiration.
10. Set the maximum number of
days and maximum number
of times that a user can log in
after the password expires.
11. Set the authentication timeout
time.
12. Set the maximum account idle
time.
The action to be taken after a user fails to log in for the specified number of attempts takes effect
immediately and can, therefore, affect the users already in the blacklist. Other password control
configurations take effect only for users logging in later and for passwords configured later.

Setting user group password control parameters

To do...
1. Enter system view.
2. Create a user group and
enter user group view.
3. Configure the password
aging time for the user group.
Use the command...
password-control composition
type-number policy-type [ type-
length type-length ]
password-control complexity {
same-character | user-name }
check
password-control history max-
record-num
password-control login-attempt
login-times [ exceed { lock |
unlock | lock-time time } ]
password-control alert-before-
expire alert-time
password-control expired-user-
login delay delay times times
password-control authentication-
timeout authentication-timeout
password-control login idle-time
idle-time
Use the command...
system-view
user-group group-name
password-control aging aging-
time
132
Remarks
Optional.
By default, the minimum number
of password composition types is
1, and the minimum number of
characters of a password
composition type is also 1.
Optional.
By default, the system does not
perform password complexity
checking.
Optional.
4 by default.
Optional.
By default, the maximum number
of login attempts is 3, and a user
failing to log in after the specified
number of attempts must wait for
1 minute before trying again.
Optional.
7 days by default.
Optional.
By default, a user can log in three
times within 30 days after the
password expires.
Optional.
60 seconds by default.
Optional.
90 days by default.
Remarks
—
—
Optional.
By default, the password aging
time configured in system view is
used.