Configuring Aaa Methods For Isp Domains; Configuration Prerequisites; Creating An Isp Domain; Configuring Isp Domain Attributes - HP 5500 HI Series Configuration Manual

Configuring AAA methods for ISP domains

You configure AAA methods for an ISP domain by referencing configured AAA schemes in ISP domain
view. Each ISP domain has a set of default AAA methods, which are local authentication, local
authorization, and local accounting by default and can be customized. If you do not configure any AAA
methods for an ISP domain, the switch uses the system default AAA methods for authentication,
authorization, and accounting of the users in the domain.

Configuration prerequisites

To use local authentication for users in an ISP domain, configure local user accounts (see
local user attributes") on the switch.
To use remote authentication, authorization, and accounting, create the required RADIUS, and
HWTACACS, schemes as described in
schemes".

Creating an ISP domain

In a networking scenario with multiple ISPs, the switch may connect users of different ISPs, and users of
different ISPs may have different user attributes, such as different username and password structures,
different service types, and different rights. To distinguish the users of different ISPs, configure ISP
domains, and configure different AAA methods and domain attributes for the ISP domains.
The switch can accommodate up to 16 ISP domains, including the system-defined ISP domain system.
You can specify one of the ISP domains as the default domain.
On the switch, each user belongs to an ISP domain. If a user provides no ISP domain name at login, the
switch considers the user belongs to the default ISP domain.
To create an ISP domain:
Step
1. Enter system view.
2. Create an ISP domain and
enter ISP domain view.
3. Return to system view.
4. Specify the default ISP
domain.
NOTE:
To delete the ISP domain that is functioning as the default ISP domain, you must change it to a non-default
ISP domain by using the undo domain default enable command.

Configuring ISP domain attributes

In an ISP domain, you can configure the following attributes:
"Configuring RADIUS
Command
system-view
domain isp-name
quit
domain default enable
isp-name
41
schemes," "Configuring HWTACACS
Remarks
N/A
N/A
N/A
Optional.
By default, the default ISP domain is the
system-defined ISP domain system.
"Configuring