Importing A Public Key From A Public Key File - HP A5830 Series Configuration Manual

[DeviceB-pkey-key-
code]30819F300D06092A864886F70D010101050003818D0030818902818100D90003FA95F5A44A2A2CD3F814
F9854C4421B57CAC64CFFE4782A87B0360B600497D87162D1F398E6E5E51E5E353B3A9AB16C9E766BD995C669
A784AD597D0FB3AA9F7202C507072B19C3C50A0D7AD3994E14ABC62DB125035EA326470034DC078B2BAA3BC3B
CA80AAB5EE01986BD1EF64B42F17CCAE4A77F1EF999B2BF9C4A10203010001
[DeviceB-pkey-key-code] public-key-code end
[DeviceB-pkey-public-key] peer-public-key end
# Display the host public key of Device A saved on Device B.
[DeviceB] display public-key peer name devicea
=====================================
Key Name
Key Type
Key Module: 1024
=====================================
Key Code:
30819F300D06092A864886F70D010101050003818D0030818902818100D90003FA95F5A44A2A2CD3F814F9854
C4421B57CAC64CFFE4782A87B0360B600497D87162D1F398E6E5E51E5E353B3A9AB16C9E766BD995C669A784A
D597D0FB3AA9F7202C507072B19C3C50A0D7AD3994E14ABC62DB125035EA326470034DC078B2BAA3BC3BCA80A
AB5EE01986BD1EF64B42F17CCAE4A77F1EF999B2BF9C4A10203010001
The output shows that the host public key of Device A saved on Device B is consistent with the one
created on Device A.

Importing a public key from a public key file

Network requirements
As shown in
peer device) through a digital signature. Before you configure authentication parameters on Device B,
configure the public key of Device A on Device B.
Configure Device B to use the asymmetric key algorithm of RSA to authenticate Device A.
•
Import the host public key of Device A from the public key file to Device B.
•
Figure 44 Network diagram for importing a peer public key from a public key file
Configuration procedure
Create key pairs on Device A and export the host public key.
1.
# Create local RSA key pairs on Device A, setting the modulus length to the default, 1024 bits.
<DeviceA> system-view
[DeviceA] public-key local create rsa
The range of public key size is (512 ~ 2048).
NOTES: If the key modulus is greater than 512,
It will take a few minutes.
Press CTRL+C to abort.
Input the bits of the modulus[default = 1024]:
: devicea
: RSA
Figure 44, to prevent illegal access, Device B (the local device) authenticates Device A (the
144