Replacing The Shaft Kit For Models Es915,Es919,Es929,Es988; Disassembly Procedure - HSD ES884 Instructions For Use Manual

HSD
Reassemble the cover, tightening the ten
9.
screws used previously
Connect the sensor connectors and recover
10.
them with the heat-shrinking sheath
Carry out the sensor calibration procedure
11.

8.3 REPLACING THE SHAFT KIT FOR MODELS ES915,ES919,ES929,ES988

8.3.1 Disassembly procedure

Remove the two pneumatic connectors
1.
Remove the steel sheet cover by loosening the
2.
four fixing screws
5801H0056 ______________________________________________________________ 133/181