Siemens SIMOTION D425-2 Manual page 32

Description
2.4 Representation of SIMOTION D425-2 DP and D435-2 DP
Note
SIMOTION D425‑2 DP and D435‑2 DP must be operated with a double fan/battery module
for heat dissipation. Without this module, the Control Units will not start up and cannot be
commissioned.
Information on how to install the double fan/battery module can be found in "Supplementary
system components", in Section Installing the fan/battery module (Page 99).
Note
SIMOTION D425‑2 DP and D435‑2 DP are supplied with pre-assembled spacers. These can
be removed if necessary.
For further details, see the
Manual.
32
SIMOTION D4x5‑2 Commissioning and Hardware Installation
SIMOTION D4x5-2
Manual, 04/2014