Remote Control; Select The Display Language And Cancel The Demonstration; Getting Started - Kenwood DPX593BT Instruction Manual

BASICS
Remote control (RC-406)
(supplied for
/ /
Can be remotely controlled with an optionally purchased remote control.
How to replace the battery
To On the remote control
Turn on the power Press and hold SRC to turn off the power.
( Pressing SRC does not turn on the power. )
Adjust the volume Press
• Press and hold
the volume to 15.
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Select a source Press SRC repeatedly.
4
ENGLISH
)
Remote sensor
(Do not expose to bright sunlight.)
Pull out the insulation
sheet when using for the
first time.
/ /
or .
to continuously increase

GETTING STARTED

1

Select the display language and cancel the demonstration

:
When you turn on the power for the first time (or [FACTORY RESET] is set to
6), the display shows: "SEL LANGUAGE" "PRESS" "VOLUME
[YES],
KNOB"
1
Turn the volume knob to select [ENG] (English) or [SPA] (Spanish),
then press the knob.
[ENG] is selected for the initial setup.
Then, the display shows: "CANCEL DEMO" "PRESS" "VOLUME
KNOB".
2
Press the volume knob.
[YES] is selected for the initial setup.
3
Press the volume knob again.
"DEMO OFF" appears.