Radio; Tuner Setting - Kenwood DPX593BT Instruction Manual

HD Radio™ tuner
(for

TUNER SETTING

IF BAND AUTO: Increases the tuner selectivity to reduce interference
noises from adjacent FM stations. (Stereo effect may be
lost.) ; WIDE: Subjects to interference noises from adjacent
FM stations, but sound quality will not be degraded and the
stereo effect will remain.
AUTO MEMORY YES: Automatically starts memorizing 6 stations with good
reception. ; NO: Cancels.
• Selectable only if [NORMAL] is selected for
[PRESET TYPE]. ( 5)
RECEIVE MODE Sets the receive mode of the HD Radio receiver.
AUTO: Automatically tunes to analog broadcast when
there is no digital broadcast. ; DIGITAL: Tunes in to digital
broadcast only. ; ANALOG: Tunes in to analog broadcast
only.
CLOCK
TIME SYNC ON: Synchronizes the unit's time to the Radio Broadcast Data
System station time. ; OFF: Cancels.
8
ENGLISH

RADIO

)
Default: XX
Search for a station
1
2
3
• To change the searching method for S / T: Press
AUTO1
AUTO2
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6) (or press one
of the number buttons (1 to 6) on the remote control).
Direct Access Tuning
1
2
3
• To cancel, press
• If no operation is done for 10 seconds after step
automatically canceled.
(for /
Press repeatedly to select RADIO.
Press repeatedly (or press
select FM1/FM2/FM3/AM.
Press S / T (or press S /
station.
: Automatically search for a station.
: Search for a preset station.
(using the remote control)
Press DIRECT to enter Direct Access Tuning.
Press the number buttons to enter a frequency.
Press to search for a station.
or DIRECT.
/ / /
/ on the remote control) to
on the remote control) to search for a
repeatedly.
2 , Direct Access Tuning is
)