Table of Contents
Advertisement
Installation and Connection
Installation and Connection
Wiring connection
¥
Purple with white stripe
Light green
Light blue with yellow stripe
Blue with white stripe (output A)
Brown
Yellow (Battery wire)
Red (Ignition wire)
Red (A7)
Yellow (A4)
Connector A
Connector B
Note: Total output for blue with white stripe wires (output A +
output B) is 12 V
350 mA.
10 A fuse
]
Connect the antenna cord to the aerial terminal.
USB input terminal (1 m)
To the car's reverse lamp harness when using the optional rear view camera
REVERSE
PRK SW
Extension wire ( ø )
To the remote adapter (not supplied) which is compatible with your car
To the power control terminal when using the optional power amplifier (Or) To the aerial control terminal in the vehicle
Not used.
Connecting the ISO connectors
You may need to modify the wiring of the supplied
wiring harness as illustrated below.
Red
(Ignition wire)
Red (A7)
Unit
Yellow
Yellow (A4)
(Battery wire)
Default wiring
To the car's parking brake detection switch harness
(For best safety, be sure to connect the parking sensor.)
Pin
A4
Yellow
A5
Blue/White (output B)
A6
Orange/White
A7
Red
A8
Black
Vehicle
]
B1/B2
Purple
/ Purple/Black
]
B3/B4
Gray
/ Gray/Black
B5/B6
White
]
/ White/Black
]
B7/B8
Green
/ Green/Black
* For 3-way speaker system
connection, see page 40.
Color and Function
: Battery
: Power control
: Dimmer
: Ignition (ACC)
: Ground connection
[
: Right speaker (Rear/Tweeter*)
[
: Right speaker (Front/Mid Range*)
[
: Left speaker (Front/Mid Range*)
[
: Left speaker (Rear/Tweeter*)
ENGLISH
41
Advertisement
Table of Contents
