Table of Contents
Advertisement
Settings
Settings
Special system settings
Display the <Special> screen.
On the Home screen, touch as follows:
Then, on the <SETUP> screen, touch [Special].
<DEMO>
• ON (Initial): Activates the display demonstration.
• OFF: Deactivates the display demonstration.
<Manual Power OFF>
Assign the function of the HOME on the monitor panel
when pressed and held.
• AV OFF: Turns off the screen and audio.
The screen and audio restores when receiving call,
inputs video signal from the rear view camera, etc.
• Complete OFF (Initial): Turns off the power.
<SETUP Memory>
• Lock: Locks the <Audio SETUP Memory>/<Audio
SETUP Recall>/<Audio SETUP Clear> settings.
– The items in the <Speaker/X'over> settings
cannot be adjusted when [Lock] is selected.
• Unlock: Unlocks the settings.
<Audio SETUP Memory>*
Memorizes the following audio settings:
• Fader/Balance
• Speaker/X'over
34
ENGLISH
• Equalizer (Adjustment on user preset ([User1] –
[User4])/Subwoofer level adjustment)
• Position/DTA
• Sound Effect
A confirmation message appears. Touch [Yes].
<Audio SETUP Recall>*
Recall the settings memorized by <Audio SETUP
Memory>. A confirmation message appears. Touch
[Yes].
<Audio SETUP Clear>*
Clear the settings made on the <Audio> screen. A
confirmation message appears. Touch [Yes].
<Software Information>
Display the information of the software (such as serial
number, application version, system version, etc.). You
can update the software.
<Open Source Licenses>
Show the Open Source Licenses.
<Initialise>
Initialize all settings made on the unit. A confirmation
message appears. Touch [Yes].
• The settings memorized on the <Audio SETUP
Memory> are not initialized.
* Available only when <SETUP Memory> is set to [Unlock].
Bluetooth settings
Display the <Bluetooth> screen.
On the Home screen, touch as follows:
Then, on the <SETUP> screen, touch [Bluetooth].
<Bluetooth>
• ON (Initial): Activates the Bluetooth function of the
unit.
• OFF: Deactivates the Bluetooth function of the unit.
<Select Device>
Connect or disconnect the paired device. (Page 21)
<Device Name>
Display/change the device name to be shown on the
Bluetooth device. (Page 22)
<PIN Code>
Change the PIN code of the unit. (Page 22)
<Device Address>
Display the device address of the unit.
<TEL SETUP>
Configure the setting for using a Bluetooth mobile
phone. (Page 26)
Advertisement
Table of Contents
