List Of Error Display; Operator Call Errors - Alarm Led Lit In Orange - Canon iP4700 Simplified Service Manual

1. LIST OF ERROR DISPLAY

1-1. Operator Call Errors (Alarm LED Lit In Orange)
Errors and warnings are displayed by the following ways:
- Operator call errors are indicated by the Alarm LED lit in orange, and messages are displayed
on the printer driver Status Monitor.
- Error codes (the latest 10 error codes at the maximum) are printed in the "operator call/service
call error record" area in EEPROM information print.
Buttons valid when an operator call error occurs:
- Power button:
- Resume/Cancel button: To cancel the job at error occurrence, and to clear the error.
LED
(Blinking in
orange)
2 times No paper in the rear tray. [1000]
No CD / DVD tray
No CD or DVD
No paper in the cassette. [1003]
3 times Paper jam.
Paper jam in the rear
guide.
Paper jam in the under
guide.
The front door is closed. [1250]
4 times Ink may have run out.
Ink tank not installed.
To turn the printer off and on again.
Error
Error
code
[1001]
[1002]
[1300]
[1303]
[1304]
[1600]
[1660]
Solution
Confirm that the rear tray is
selected as the paper source. Set
the paper in the rear tray, and
press the Resume/Cancel button.
Set the CD / DVD tray, and press
the Resume/Cancel button.
Set a CD or DVD in the CD / DVD
tray, and inset the CD / DVD tray
in the proper position. Then, press
the Resume/Cancel.
Confirm that the cassette is
selected as the paper source. Set
the paper in the cassette, and
press the Resume/Cancel button.
Remove the jammed paper, and
press the Resume/Cancel button.
Open the front door.
Replace the applicable ink tank
and close the cover.
Install the applicable ink tank(s)
properly, and confirm that the
LED's of all the ink tanks light in
red.
(2/24)
Remarks
The error is detected
at the start of printing
or during printing.
When the error is
cleared by pressing
the Resume/Cancel
button, ink may run out
during printing.