Hdd Assist Mode (4C) - Toshiba e-STUDIO556 Service Manual

5.10 HDD Assist Mode (4C)

5.10.1 General description
This mode is available only when the security HDD (ADI-HDD) is mounted in the equipment. It enables
you to check the type of the mounted HDD, revert the HDD to the factory default or remove keys.
Functions:
• Checks the type (ADI or SATA) of the mounted HDD.
• Disposes of ADI-HDD data safely without any of leakage.
• Deletes user data when reusing a used ADI-HDD.
5.10.2 Operation procedure
[4][C]
[Digital Key]
[Power]
Turn the power ON while pressing the [4] and the [C] button simultaneously. Then the type of the
mounted HDD is checked and either of the following screens is displayed.
• When the security HDD is mounted
HDD Assist Mode
Current HDD type: ADI HDD
Select number (1-2) and press START key
1. Revert factory initial status HDD
2. Remove key
• When a normal HDD is mounted
© 2012 TOSHIBA TEC CORPORATION All rights reserved
[START]
(Select)
for SATA-HDD
[STOP]
Cancel
Fig. 5-7
5 - 19
HDD data
（ [Power] OFF
）
clear
Operation
Failed
System Firmware Version
Update Mode
e-STUDIO556/656/756/856(Ver03)
: xxxx(x.x.x.x)
: 4c Mode
SELF-DIAGNOSTIC MODE
5