Features - Sanyo MCO-18AIC Service Manual

Features

1. PID control with micro-computer.
This unit has PID control (Proportional Integrate Differential) accurate controls internal
temperature, as well as air sensor system monitoring internal temperature.
2. Infrared CO sensor installed.
2
Infrared CO sensor is not affected by humidity.
2
3. UV sterilization system (Option)
Water and the circulating chamber air in the humidifying pan are sterilized by UV lamp.
Optional setting of light mode is available.
4. Rounded Ball corners.
Inside chamber wall made by stainless steel and its corner made rounded type.
This made cleaning easier and de-contamination.
5. Reduce contamination.
Inside chamber material is made by anti-bacteria SUS.
Appearance and durability are almost same with ordinary SUS.
Anti-bacteria SUS has effect same as copper alloyed. (except for humidity pan)
6. Expandability (Module concept)
The control circuit is adopted commonly with MCO-20AIC.
7. Options
(1) Castor with adjustor (roller base: MCO-18RB)
(2) CO gas tank switcher (assembled in unit: MCO-21GC)
2
(3) Extra stainless steel shelves (1 shelf + 1 shelf support basis :MCO-46ST)
(4) Stacking plate for double-piled (MCO-18PS)
(5) UV sterilization system (MCO-18UVS)
Note ; Model name
M CO – 18 A I C
C: Copper alloy anti-bacteria stainless steel
I: Infrared CO
A: Air jacket
18: Chamber capacity (170L)
CO: CO
M: Medical equipment
sensor
2
Incubator
2
1