Table of Contents
Advertisement
L
C
C
I
IGHTING
ONTROL
ONSOLE
23. Softkeys
Example of Screen Display
The softkey buttons are context sensitive to what you are doing. When no dialog boxes are open, they provide
additional functionality that is not available with the hard buttons on the console. When a dialog box is open, the
LEDs show you what buttons are used to jump to specific controls (lists, checkboxes, etc.). You can always see what
each button will do by reading the bubbles at the bottom of the screen. The LED will blink showing you what control
currently has focus.
Once a command is entered into the command line, you may notice green arrows appearing next to selected S-
softkeys. These arrows correspond with the M-softkeys above. By selecting an S-key with an arrow you will notice
the M-softkeys change. For example, by pressing [RECORD], you will notice many of the S-softkeys have the option
to select additional M-softkeys. By selecting [S3] [RECORD TYPE], you now have four options to choose from in
the M-softkeys [M1-M4].
24. Step Forward / Step Back
• Pressing the relevant button steps you through the selected Cue List using the step-time set in the properties of the
Cue List ([VIEW] [SELECT]).
• If the Cue List is active ([GO] had been pressed at some point), the effect will be seen on stage. If it is not active,
only the Cue List pointer will move, awaiting a Go command.
• Use with [SHIFT] to move to the top or bottom of the selected Cue List.
• If a long cue is running (green LED is flashing on Go button) and you want to quickly complete it, press [STEP
FORWARD]. The cue will complete in the Cue List's step-time as determined by the Properties of the Cue List.
25. Tools
• Press [SHIFT] [TOOLS] to change the softkeys to the available tools. Select a tool ([S12] gives more options). Ini-
tiates softkey tool functions such as flip, channel check, flash, etc.
• If the LED is on, the tool is active. Press the button to turn off the tool.
• Pressing and releasing this button when the LED is off will toggle the last selected tool on.
Note: The status area at the bottom of the screen shows the current active tool.
3 0
BUTTON DETAILS
& S
G
NSTALLATION
ETUP
UIDE
Palette VL
Advertisement
Table of Contents
