Table of Contents
Advertisement
L
C
C
I
IGHTING
ONTROL
ONSOLE
18. Record
Recording Cues:
• The Record function stores values into an item (usually Cues or Looks). To record a cue, press the [REC] button.,
then press the number of the cue you wish to record and press [ENTER].
• When not using the Windows UI console personality, pressing [SHIFT] [RECORD] will open up the Record dia-
log box. A default cue number is entered and the cursor is waiting for you to enter a new one (if necessary). The
[ENTER] key will close the dialog box and record the cue to the selected Cue List.
• To quickly record to a different playback master, press [SHIFT] [REC] then the desired [SELECT] key on the
playback.
Recording Looks:
• To quickly record a Look, press [SHIFT] [REC] then press a [BUMP] button.
• Press [REC] then press [LOOK], enter a number and press [ENTER].
• To record a group of channels, press [REC] then press [GROUP], enter a number and press [ENTER]. A Look will
be recorded (including the levels). Using the [GROUP] button, you can bring back the selected channels and set
them to any level using the level wheel or keypad.
Note: The Red LED will be on any time there is a change that has not been recorded.
19. Undo
• The Undo feature will reverse many commands. [UNDO] [ENTER] will reverse the the last level change. UNDO
RECORD, UPDATE, DELETE and GOTO can all be reversed.
• Press the button twice to activate the RELEASE command. The first stage of Release will release the last attribute
family that was adjusted.
• The second stage of Release will release all active channels.
• The third stage of Release will release any remaining channels.
• Press [SHIFT] [UNDO] to bring back previously released items. (This works in a three-stage process.)
Notes:
• If a dialog box is open, the LED will be flashing. Pressing [UNDO] will close the dialog box without changes
being committed.
• If channels are selected, the LED will be flashing.
• If channels have been changed but are not selected, the LED will flash in a step pattern.
20. Release Playback
• Pressing the [REL-PB] button will release the Cue List on the selected playback master. The cue pointer will
remain at the current cue position, therefore pressing [GO] will put you back into the same state you were in before
you hit [REL-PB].
• Press [SHIFT] [REL-PB] to release all Cue Lists.
• Press and hold [REL-PB] and a [SELECT] button to release that Cue List and not change your currently viewed
Cue List.
2 8
BUTTON DETAILS
& S
G
NSTALLATION
ETUP
UIDE
Palette VL
Advertisement
Table of Contents
