Receiving A Line Lockout Alarm - Hitachi SelecSet 900 User Manual

R L
ECEIVING A INE

Receiving a Line Lockout Alarm

The <LOA>
lamp
3-12
L A
OCKOUT LARM
When a station is connected longer than a predetermined
time, the line lockout alarm (LOA) lamp lights. (A station
is a phone within your facility.) To determine which
station is locked out:
1 Press the <LOA> key to display the locked-out
station's number. If multiple stations are in the
locked-out state, the LOA light remains lit until all
stations are returned to the idle state.
2 Continue to press the <LOA> key until all locked-out
station numbers have been displayed. Someone
should be sent to locked-out stations to determine if
they are in use. Those that are not in use should be
made idle.
3
Press <START> or lift handset to clear the display.
S S
ELEC
HCXTD860, Rev. A01, September 2001
940A U G
ET SER UIDE