Key Lamps; Table 1-3 Lamp Indications For Autodial Keys - Hitachi SelecSet 900 User Manual

K L
EY AMPS

Key Lamps

About autodial
keys
1-14
Key lamps (LEDs) are provided for the following keys on
your SelecSet 940A console:
• CAPs
• Programmable keys
• Fixed keys (except <DISC>)
These key lamps indicate the status of the key, informing
you as to whether the line or feature is in use.
describes the meanings of the lamp indications. Not all
features invoke all indications and your programmed keys
may not exhibit all of the indications described here.

Table 1-3 Lamp indications for autodial keys

Lamp status
Dark
Steadily lit
Slow flashing
Fast flashing
Very fast
flashing
S
Definition
Key is not in use
Key is in use. Either an active call is at
the key or a feature has been activated
by the key
A call is on hold at this key.
A call is ringing at this key.
A call has terminated at this key with
priority ringing.
HCXTD860, Rev. A01, September 2001
S 940A U
ELEC ET SER
Table 1-3
G
UIDE