Transferring A Caller To A Dnd Station - Hitachi SelecSet 900 User Manual

S S 940A U
ELEC ET

Transferring a Caller to a DND Station

Procedure
HCXTD860, Rev. A01, September 2001
G
SER UIDE
To transfer a caller to a do-not-disturb station:
1 When you answer the call, dial the station number to
which you want to transfer the call.
You hear reorder tone (sounds like a fast busy signal.)
The display indicates that the first party is on hold at
CAP 2, and the second party, who is in the
do-not-disturb state, is at CAP1.
2 Press the CAP representing the caller on hold.
3 Press <JOIN>.
4
Press <OVR>.
5 Dial the station number.
T
RANSFERRING A
C DND S
ALLER TO A TATION
4-15