Rocker Switch 1/2; Switching Rocker Switch - ABB 2CSYK1102C/S Product Manual

MYLOS Building Automation
®
3.1

Rocker switch 1/2

3.1.1

Switching rocker switch

No. Function
16 Disabling
23 Disabling
The channel circuitry can be blocked or enabled using the communication object.
A blocked channel behaves as if there was no input signal. The communication
objects of the channel are still available.
17 Switching
24 Switching
Telegram value:
According to parameter setting, this communication object can be switched by the ON, OFF or Switching input drive.
With Switching the previous value, for example "1", is directly switched to value "0". It is important to ensure that
the communication object can be written from the outside. Therefore cyclic sending is interrupted or is not possible.
34 Disabling LED
34 Disabling LED
The "Disabling Led" communication object makes it possible to enable (1) the LED so as that it switches
on or off depending on the operating mode selected from the parameters or to disable it (0) forcing it into a
continuous switching off status.
3.1.2 Switching rocker switch
No. Function
16 Disabling
23 Disabling
The channel circuitry can be blocked or enabled using the communication object.
A blocked channel behaves as if there was no input signal. The communication
objects of the channel are still available.
Operation of communication objects
Object name
Rocker switch 1
Rocker switch 2
Rocker switch 1
Rocker switch 2
"0" OFF
"1" ON
Rocker switch 1
Rocker switch 2
Object name
Rocker switch 1
Rocker switch 2
MYLOS
Type of datum
1 bit DPT_Enable
1 bit DPT_Enable
1 bit DPT_Switch
1 bit DPT_Switch
1 bit DPT_Enable
1 bit DPT_Enable
Type of datum
1 bit DPT_Enable
1 bit DPT_Enable
Building Automation | Operation of communication objects 35
®
Flags
C,W,T
C,W,T,U
C,W,T
C,W,T
C,W
C,W
Flags
C,W
C,W