Customizing The Display - Uniden SDS100 Owner's Manual

The SDS100 gives you considerable control over what items are shown on the display as well as
what colors are used for each item.
To customize the display, select MENU → Display Options → Customize then select the display you
want to customize:
•
Set Simple Conventional
•
Set Simple Trunk
•
Set Detail Conventional
•
Set Detail Trunk
•
Set Search/CC Mode
•
Set Weather Mode
•
Set Tone Out Mode
Notes:
• During scan you can switch between Simple and Detail display modes by holding on a
channel and pressing F+DISP.
• Some display modes or display fields only allow you to change the colors.
• Trunking/Conventional modes share the same display field colors, but each scan mode can
display different data items.
• Every possible data item cannot fit into all the different display fields.
After selecting the display mode to customize, the scanner displays a sample display in the mode
you selected. Rotate the scroll to highlight the area you want to modify, then press the appropriate
soft key for the attribute you want to change:
• Item: Change the item displayed in the field.
• T-Color: Change the text color for the field.
• B-Color: Change the background color for the field
When you select one of the above, the display will switch to showing the available options. Select
the option to use, then press E to return to the sample display.
The customizable fields are shown in the following images. Note that the areas shaded darker
in these images can only have text/background color changed. The displayed item cannot be
changed.

CUSTOMIZING THE DISPLAY

38