Do you have a question about the Bearcat BC 210XLT and is the answer not in the manual?
Questions and answers
Cathy
February 7, 2025
How do you program the scanner
1 comments:
Mr. Anderson
February 10, 2025
To program the Uniden Bearcat BC 210XLT scanner, follow these steps:
1. Turn On the Scanner – Press the power button and ensure the volume and squelch are adjusted properly. 2. Enter Programming Mode – Press the "Manual" button to select the channel you want to program. 3. Input Frequency – Use the numeric keypad to enter the desired frequency. 4. Store Frequency – Press the "E" (Enter) button to save the frequency to the selected channel. 5. Repeat for Additional Channels – Press "Manual" to move to the next channel and repeat the process. 6. Scan Programmed Channels – Press the "Scan" button to start scanning the programmed frequencies.
To delete a frequency, program 0.000 into the channel and press "E". Ensure the squelch is set correctly to reduce static noise.
Need help?
Do you have a question about the Bearcat BC 210XLT and is the answer not in the manual?
Questions and answers
How do you program the scanner
To program the Uniden Bearcat BC 210XLT scanner, follow these steps:
1. Turn On the Scanner – Press the power button and ensure the volume and squelch are adjusted properly.
2. Enter Programming Mode – Press the "Manual" button to select the channel you want to program.
3. Input Frequency – Use the numeric keypad to enter the desired frequency.
4. Store Frequency – Press the "E" (Enter) button to save the frequency to the selected channel.
5. Repeat for Additional Channels – Press "Manual" to move to the next channel and repeat the process.
6. Scan Programmed Channels – Press the "Scan" button to start scanning the programmed frequencies.
To delete a frequency, program 0.000 into the channel and press "E". Ensure the squelch is set correctly to reduce static noise.
This answer is automatically generated
Can you call me
Call me Mobil 8287300664