Start/Stop Recording; Avoiding Channels, Departments, Sites, And Systems; Channel Avoid; Department Avoid - Uniden SDS100 Owner's Manual

START/STOP RECORDING

While scanning, press Func then Replay/Reccord.
Resets to Off when you turn off the scanner.

AVOIDING CHANNELS, DEPARTMENTS, SITES, AND SYSTEMS

Temporary Avoids are cleared when you cycle power. You must manually clear permanent avoids.

Channel Avoid

When the Channel is in the display or in Channel Hold mode: To Temporary Avoid, press Avoid
once. To Permanent Avoid, press twice when the channel is in the display or in Channel Hold mode.

Department Avoid

Press Dept (soft key 2) then Avoid once to Temporary Avoid. Press Avoid twice to Permanent Avoid.

Site Avoid

When the Site is in the display or in Site Hold mode (Func then Dept):
To Temporary Avoid, press Dept then quickly press Avoid.
To Permanent Avoid, press Dept then quickly press Avoid twice.
To Stop Avoiding, press Dept then Avoid once.
Press Func then Dept to release Site hold.

System Avoid

Press System then Avoid once to Temporary Avoid. Press Avoid twice to Permanent Avoid.
14