Mitsubishi Electric MELSEC-Q Series Programming Manual page 37

Instruction Condition
S(P).SFCSCOMR At instruction execution
S(P).SFCTCOMR
Instruction Condition
S(P).SFCSCOMR At END processing (read 1 comment)
S(P).SFCTCOMR At END
processing
(read 1
comment)
Instruction Condition
S(P).SFCSCOMR At END processing (read 1 comment)
S(P).SFCTCOMR At END
processing
(read 1
comment)
*2 Processing time for the program shown in the condition (scan time: 15ms). The processing time varies depending on the number of files
in standard ROM and the SFC program (transition conditions and the number of active steps).
Universal model QCPU
Q03UDVCPU
Min.
54.6s
54.8s
Universal model QCPU
Q03UDVCPU
Standard RAM
0.26ms
Transition condition for serial 0.66ms
transition
Transition condition after 0.66ms
selection branching
Transition Number of 0.87ms
condition after parallel
parallel couplings: 2
coupling
Number of 1.28ms
parallel
couplings: 32
LCPU
L06CPU, L06CPU-P, L26CPU, L26CPU-P, L26CPU-BT, L26CPU-PBT
Standard ROM
1.5ms
Transition condition for serial
transition
Transition condition after
selection branching
Transition Number of
condition after parallel
parallel couplings: 2
coupling
Number of
parallel
couplings: 32
Q04UDVCPU, Q06UDVCPU,
Q13UDVCPU, Q26UDVCPU
Max. Min.
65.0s 51.3s
65.3s 51.7s
Q04UDVCPU, Q06UDVCPU, Q13UDVCPU,
Q26UDVCPU
Standard RAM
0.25ms
0.44ms
0.35ms
0.55ms
0.75ms
*2
Max.
65.0s
65.3s
3 SPECIFICATIONS
35
3.3 Processing Time
3