Chapter 4
4-4
Using the InfoRanger
Rear View
Cable Connector
USB Port
Figure 4-2 Rear View of the InfoRanger
DC Input Terminal
☞ This is an input terminal, which provides DC 12V to the InfoRanger through
the power adapter.
Reset Switch
☞ This is used to initialize the modem.
Ethernet Port
☞ The InfoRanger supports up to 40Mbps to download data and also up to
10Mbps to upload data with this Ethernet port. This port is connected to the
network interface card installed on PC or a hub or a switch if it is connected
to multiple PCs using the Ethernet cable.
Ethernet Port
DC Input Terminal