Chapter 3
3-2
Installing the InfoRanger
Connecting the Coaxial Cable
Connect one end of the coaxial cable to the Cable connector of the InfoRanger and
connect the other end of the coaxial cable to the cable outlet or cable splitter.
Slide the pin in the center of the coaxial cable into the hole in the Cable connector
carefully without bending, and turn the connector clockwise until the cable is
firmly attached.
C a b
le
Figure 3-4 Connecting the coaxial cable to the Cable connector
The coaxial cable is not provided by default.
U S
B
E t h
e r n
e t