Configuring Tcp/Ip Protocol - Samsung InfoRanger SCM-140U User Manual

Chapter 2
2-6
Prior to Installing

Configuring TCP/IP Protocol

Once you have set-up the IBM compatible PC running on Windows 95 (or later)
or the Macintosh running on System 7.5(or later), you need to install TCP/IP
protocol and network interface card, only when using Ethernet port of InfoRanger.
You do not need to install TCP/IP protocol when using USB port, because TCP/IP
protocol is installed automatically while USB driver is installed. Skip this section
and go to the next chapter when using USB port.
Referring to the manual that provided with your network interface card, please
install the network interface card on your computer and install the network
interface card driver. Then, install TCP/IP protocol as follows. If you already
installed TCP/IP protocol, skip this section and go to the next chapter.
The TCP/IP protocol is installed automatically during Windows 2000
installation. Generally it is not necessary to install TCP/IP protocol in
Windows 2000 environment unless you removed TCP/IP protocol on
purpose.