Control Wiring; Access - GE AF-600 FP Design And Installation Manual

Installation
2 2
Figure 2.22 Unit Size 61
Figure 2.23 Unit Size 62
Figure 2.24 Unit Size 63
2-12
AF-600 FP Design and Installation Guide
Figure 2.25 Unit Size 64

2.5.8 Control Wiring

•
•

2.5.8.1 Access

•
•
Figure 2.26 Control Wiring Access for IP20/Open chassis
enclosures
DET-768A
Isolate control wiring from high power
components in the adjustable frequency drive.
If the adjustable frequency drive is connected to
a thermistor, for PELV isolation, optional
thermistor control wiring must be reinforced/
double insulated. A 24 V DC supply voltage is
recommended.
Remove access cover plate with a screw driver.
See Figure 2.26.
Or remove front cover by loosening attaching
screws. See Figure 2.27.