Configuring Raid Arrays - Lenovo ThinkStation P500 Configuration Manual
How to create and
configure raid arrays
Hide thumbs
Also See for ThinkStation P500:
- Hardware maintenance manual (220 pages) ,
- User manual (190 pages) ,
- Manual (182 pages)
Advertisement
2. Configuring RAID Arrays
Configuring RAID arrays using the onboard Intel S-SATA controller
Legacy BIOS Method
Use this method to create a basic RAID array using the onboard Intel S-SATA controller with the system
BIOS set to Legacy mode.
NOTE: This document shows the BIOS screens in Text Mode. P510/710/910 uses a GUI interface for the
BIOS setup screens by default. The general structure/layout of the BIOS setup screens in GUI Mode are
the same as Text Mode, but will look slightly different.
1. Install the drives for the RAID array into the system.
P500/P510
1/
2. Power on the system and enter BIOS setup using the F1 key when prompted.
P900/P910
P700/P710
Advertisement
