Lenovo ThinkStation P500 Configuration Manual page 11

How to create and configure raid arrays

Hide thumbs Also See for ThinkStation P500:

11. At this menu, the user should see a list of all drives connected to the S-SATA controller. To

create a RAID volume, use the up and down arrow keys to select "Create RAID Volume" and

press ENTER.

12. To give the volume a unique name, press ENTER to input the name and then press ENTER when

finished.

13. Use the up and down arrow keys to highlight "RAID level" and press ENTER. Select the desired

RAID level and press ENTER. Note : only supported RAID levels will be listed.

14. Use the up and down arrow keys to select the disks to be included in the volume. Use SPACE to

select each disk.