Lenovo ThinkStation P500 Configuration Manual page 10
How to create and
configure raid arrays
Hide thumbs
Also See for ThinkStation P500:
- Hardware maintenance manual (220 pages) ,
- User manual (190 pages) ,
- Manual (182 pages)
Advertisement
6. Under "Configure S-SATA as", change the setting from "AHCI" to "RAID".
7. Save and exit BIOS setup.
8. After exiting, the system will reboot. Press F1 to enter BIOS setup.
9. Use the left and right arrow keys to select the "Advanced" tab.
10. Use the up and down arrow keys to select "Intel RSTe S-SATA Controller" and press ENTER.
Advertisement
